Agilent G6410B LC-MS/MS

G6410B LC-MS/MS from Agilent

Ref: st5405


12 month On-Site Warranty (UK)


£ Please Call

Just In

This refurbished Agilent 6410B QQQ LC/MS system can be used for quantitative applications in pharmaceutical ADME/DMPK studies, biomarker validation, clinical research, food safety, forensics, toxicology, and environmental analyses.

Are you an academic organisation? This system qualifies for a University discount
Enquire for full details...

System Details

Download Calibration Data for Agilent 6410B 1200 LC-MS/MS System Download this instrument's Tune & Calibration Data:

This used instrument has been upgraded with 2 turbomolecular pumps for enhanced sensitivity - please see the Limit of Detection and ESI Tune Report.

For method development, the MassHunter software includes an optimizer function, where the analyte can be infused directly into the ionization source or by a series of injections. The software then identifies selected product ions as well as optimizing fragmentor voltage and collision energies from a mix of analytes assayed at once.

6410B Specification

  • Source: ESI
  • MS/MS sensitivity: Measured as 1 pg of reserpine injected on column, ESI source quantifying on the transition m/z 609 to 195 - Signal-to-noise ratio >500:1
  • Mass resolution: Three settings (FWHM) - Unit: 0.4µ; Wide: 1.2µ; Widest: 2.5µ
  • Mass accuracy: 0.1µ across the mass range
  • Mass stability: <0.1µ in 24 h
  • Dynamic range: >6.5 x 106
  • Mass range: m/z 5-2,000
  • Scan rate: 5,200 µ/sec
  • Scan modes: MS scan, MS/MS product ion scan, MRM, MS/MS neutral loss/gain scan and precursor ion scan, SIM
  • Minimum MRM dwell time: 2 ms
  • MRM transitions: 200 per time segment, thousands possible with multiple segments
  • Positive/negative polarity switching: Inter-segment delay of 20 msec
  • Collision cell: High-pressure, hexapole with linear acceleration
  • Cross-talk: None detectable
  • Single point of control: Single-point data system method capability with full control of Agilent 1100 and 1200 Series HPLC systems and 6410 Triple Quadrupole LC/MS
  • Time programming: Positive/negative polarity switching in a time segment, Scan and SIM or MRM (plus other modes of data collection), Solvent divert through calibrant delivery system valve, Possible 99-time segments with potential 99 MRMs per-time window
  • Ionization source: Electrospray (ESI) with a signal-to-noise ration >500:1
  • Autotune: Automated optimization of ion optics and mass axis calibration
  • Solvent declustering: Countercurrent gas
  • Detector: High-energy conversion dynode and removable electron multiplier horn
  • Vacuum system: 2 x triple-stage turbomolecular pump with one mechanical pump
  • Dimensions: (W) 1110mm x (D) 660mm x (H) 470mm
  • Weight: 107.5 kg

System Includes

  • Agilent 6410B LC-MS/MS with ESI probe (option of Multimode ESI/APCI source - please enquire)
  • Agilent 1200 LC system including
    • Agilent 1200 G1315D DAD
    • Agilent 1200 G1316C Column Oven
    • Agilent 1200 G1329A Autosampler
    • Agilent 1200 G1330B Sample Chiller
    • Agilent 1200 G1312B Binary Pump
    • Agilent 1200 G1379B Solvent Degasser
    • Bottle Tray
  • Option of 1290 UHPLC- please enquire
  • 1 x Edwards E2M28 Roughing Pump
  • PC with MassHunter installed
  • TFT Screen
  • New Samsung Printer
  • UK Installation and warranty as specified
  • * Note - 1200 system can be configured to suit your requirements
  • ** All modules and MS complete with front panels (some not shown in images).
Contact Us Here

Servicing & Maintenance

As a continually expanding company Jaytee have a great deal to offer, from service agreements to total instrument portfolio management. Since each client has different requirements, we are able to provide tailored service agreements, whether it be on the instruments you purchase from us, or your own equipment.


Jaytee has developed its calibration policy in line with the marketplace and offers a wide range of calibration services. Our clients often require instrument PQ/validation, so we offer a unique approach to this, providing our own calibration package that is specific to your needs.

Enquire / Get A Quote

Fill out the form below to get in touch with us at Jaytee Biosciences:

Contact Us

Interested in Visiting For a Demo:

Interested in FaceTime Demo:

Interested in Renting:

I wish to be contacted by Jaytee Biosciences Ltd regarding this enquiry.

I am happy to be contacted in future by Jaytee Biosciences Ltd in related matters.

Back to Top

Contact Information

Jaytee Biosciences Ltd,
Altira Business Park,
Herne Bay, Kent, CT6 6GZ.

Phone: +44 (0) 1227 265333

Email: Mailto sales jaytee

Receive a FaceTime demonstration of this MS working

Why employ ms4sale?

Your MS options are far reaching, so why use Jaytee Biosciences? Unlike other providers of used MS equipment, we have the ability to completely:

This is because we employ both skilled engineers and experienced scientists, which allows us to provide a value added solution.

When we acquire an MS system, we are not simply re-listing for sale with a mark-up. We service,test and run the system, producing chromatographic and mass spectral data before we advertise. When our clients ask us whether a particular system is suitable for their application, we provide detailed information, and offer a pre-visit service whereby you send us your sample, which we run and prove for your benefit. Why? Because we can, and because it helps you make the right choices.

Ask yourself why other companies are only showing stock images, with no data or proof of performance - because we have the skills, you get the peace of mind and the ongoing support for your method.

Finally, this is at no added cost, since our pricing policy is flexible, and therefore competitive - a win/win!

Jaytee; No take overs/mergers in over 35 years - just professional, solid, skilled on going support.