Agilent 5975C with 7694 Headspace GC Mass Selective Detector

5975C with 7694 Headspace GC/MSD from Agilent

Ref: st5142


12 month On-Site Warranty (UK)


£ Please Call

This Year 2004 Agilent 5975C Inert GC-MSD system comes complete with EI ionization mode, is in excellent working condition, and comes complete with UK installation and a full 1 year warranty.

Are you an academic organisation? This system qualifies for a University discount
Enquire for full details...

System Details

Download AutoTune Data for Agilent 5975

Please see the included photos displaying the pristine condition of the modules. Provided in full working conditioned and serviced, cleaned, tested and calibrated to our high standards, the system comes complete with PC/TFT Screen running Chemstation MSD, producing out-of-the-box' peaks.

Used Agilent 5975 System Details

  • Inert source for better performance
  • Extended mass range
  • Synchronous SIM/Scan with automatic setup
  • New maintenance-free rough pump offerings
  • Faster compound estimation with SemiQuant
  • Improved Deconvolution Reporting Software with new Retention Time Locking databases

This refurbished Agilent 5975 inert XL model not only scans up to 1050 u but it does so with accuracy and precision you have come to expect from Agilent. The proprietary hyperbolic quadrupole design ensures the necessary resolution to produce classical isotope ratios and accurate mass assignment across the entire mass range (see data).The inert ion source requires less cleaning, since even the most active compounds have difficulty sticking to the inert material. So you can run sample after sample without compromising your data. The inert MSD Performance Electronics maximizes signal transmission for fast GC/MS in full scan, Selected Ion Monitoring (SIM) and Synchronous SIM/Scan modes.

  • Scan rates up to 10,000 u/sec compatible with Fast GC/MS
  • More efficient electronics run Synchronous SIM/Scan without compromising performance
  • More data points for better peak integration

Synchronous SIM/Scan is a mode of operation that enables collection of both SIM data and full scan data in the same acquisition. In many laboratories full scan is the most common form of data collection due to the ease of setup and the availability of spectral libraries. SIM mode, on the other hand, offers significant improvements in sensitivity over full scan data. However, SIM data cannot be searched against commercially available spectral libraries for match confirmation. The Agilent Synchronous SIM/Scan mode combines the best of both SIM and full scan into a single acquisition.Furthermore, the high-performance electronics of the 5975C inert MSD provides very fast and flexible SIM and Scan.

5975 MSD Specification

Year of manufacture: 2004

Product number: 5975C G3172A (Inert XL MSD)

Ion source type: Non-coated,  inert

Mass Filter: Monolithic hyperbolic quadrupole

Maximum Mass: 1050 Da

Agilent 5975 Detector: EM with replaceable horn

Scan rate: Up to 10,0000 amu/s

EI Scan sensitivity: 100:1 S/N for 1pg OFN scanning from 50-300 amu at nominal m/z 272 ion

Turbo Pump type: Performance Turbo (230 l/s)

Ionization modes: Electron Impact (EI)

6890N Specification

Gas Chromatograph: Agilent 6890N G1530N Network

7694 GC Headspace Specification

Features a 100-cm nickel transfer line, 44-vial tray, constant heating time and multiple headspace extraction technique.

Sample Handling
Carousel: holds forty-four 10-mL or 20-mL vials at ambient.

Multiple headspace extraction (MHE) up to 10 extractions per vial.
Vial heating: oven holds up to six vials, which can be heated during the GC run.

Analysis Conditions
Vial heating: from 0.5-999 min in 0.1-min increments at temperatures from 40 °C to 200 °C.

Oven temperature range: 40 °C to 200 °C.

Valve and loop temperature range: 50 °C to 200 °C.

Transfer line to the GC, temperature range: 50 °C to 220 °C.

Loop fill and loop equilibration times: set table from 0.10-99 min in 0.01-min increments. (A short fill time permits injection of a pressurized sample.)

Injection time (carrier flows through loop): 0.10-99 min in 0.01-min increments from the keyboard interface.

Carrier gas pressure range: 60-100 psi.

Vial pressurization time: adjustable from 0-99 min in 0.01-min increments from the keyboard interface.

Vial pressurization range: 0-50 psi or to the maximum for the sample container

Headspace Methods
Four methods may be stored in memory and chained in sequence. A method may specify any sequential carousel position.

A method may include automatic vial heating temperature increments or time increments (1 °C or 1-min units) to determine the optimum setting.

GC cycle time: 2-999 min. (An Agilent GC-Ready signal can be sensed or ignored.)

Communication Protocols
BCD output

Physical Specifications
Power required: 600 VA maximum
Operating voltage: 230 V
Dimensions: height: 48 cm, width: 42 cm, depth: 44 cm, weight: 35 Kg

Environmental Specifications
Storage: -40 °C to 70 °C
Operation: 10 °C to 45 °C
Humidity: 0 to 95%

General System

Data: PC running Chemstation MSD E.02.02.1431

Rough Pump: Edwards E2M28 Roughing Pump

Offered with a full Jaytee Biosciences 1 year on-site warranty, this system is in excellent working condition and is ready for full demonstration - enquire below.

Contact Us Here

Servicing & Maintenance

As a continually expanding company Jaytee have a great deal to offer, from service agreements to total instrument portfolio management. Since each client has different requirements, we are able to provide tailored service agreements, whether it be on the instruments you purchase from us, or your own equipment.


Jaytee has developed its calibration policy in line with the marketplace and offers a wide range of calibration services. Our clients often require instrument PQ/validation, so we offer a unique approach to this, providing our own calibration package that is specific to your needs.

Enquire / Get A Quote

Fill out the form below to get in touch with us at Jaytee Biosciences:

Contact Us

Interested in Visiting For a Demo:

Interested in FaceTime Demo:

Interested in Renting:

I wish to be contacted by Jaytee Biosciences Ltd regarding this enquiry.

I am happy to be contacted in future by Jaytee Biosciences Ltd in related matters.

Back to Top

Contact Information

Jaytee Biosciences Ltd,
Altira Business Park,
Herne Bay, Kent, CT6 6GZ.

Phone: +44 (0) 1227 265333

Email: Mailto sales jaytee

Receive a FaceTime demonstration of this MS working

Why employ ms4sale?

Your MS options are far reaching, so why use Jaytee Biosciences? Unlike other providers of used MS equipment, we have the ability to completely:

This is because we employ both skilled engineers and experienced scientists, which allows us to provide a value added solution.

When we acquire an MS system, we are not simply re-listing for sale with a mark-up. We service,test and run the system, producing chromatographic and mass spectral data before we advertise. When our clients ask us whether a particular system is suitable for their application, we provide detailed information, and offer a pre-visit service whereby you send us your sample, which we run and prove for your benefit. Why? Because we can, and because it helps you make the right choices.

Ask yourself why other companies are only showing stock images, with no data or proof of performance - because we have the skills, you get the peace of mind and the ongoing support for your method.

Finally, this is at no added cost, since our pricing policy is flexible, and therefore competitive - a win/win!

Jaytee; No take overs/mergers in over 35 years - just professional, solid, skilled on going support.